The ALL-100A Programmer Series is a newly designed new generation universal IC programming platform. It can be used to convert a single engineering type or a multi-burning mass production type burner with a variety of different programming modules. Up to 8 units can be connected to the same module recorder via a USB interface for asynchronous or synchronous programming so that each operator’s programming capacity reaches its peak.
Each pin of the ALL-100A series programmer is a high-performance, high-speed, high-stability drive circuit, and each foot can be programmed. The ALL-100A series inherits the advantages of the company’s well-known ALL-11 and its original The ALL-11 series of ADAPTER and CONVERTER ensure that the user’s old assets can continue to create new value. The ALL-100A series supports a wide range of ICs, including EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/ MCU, RS-MMC/MMC/SD Card, etc. Most DIP, SDIP, SOP, MSOP, QSOP, SSOP, TSOP, TSSOP, PLCC, QFP, CASON, QFN, MLP, MLF, BGA, CSP, SOT, Programmable ICs in DFN packages can be programmed directly on the DIP48 or through appropriate adapters to meet the programming requirements of new ICs, including modern low voltage types.
The ALL-100A programmer uses a high-speed USB 2.0 interface to connect to a notebook or desktop computer using the Windows 98 SE/Me/2000 SP4/XP SP1/ Server 2003 operating system. The ALL-100A programmer is very flexible. Not only suitable for engineering purposes, such as the addition of a fourth drive line card to upgrade to ALL-100AP or ALL-100AGNG for mass production, while the other model ALL-100AG4 is to use four ALL-100AG with the necessary The lines combine in the same chassis, which simplifies the preparation of the mass production and improves the operation efficiency. The personal burning capacity reaches the highest level. The ALL-100A series uses a new generation design concept, which is suitable for engineering units and production units. To solve the burning challenges of the new generation of ICs with increasing difficulty.
HILO ALL-100A Programmer Performance Features
● A wide range of supported ICs:
The programmer covers eight pins to 300 pins of various ICs, including EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/MCU, etc. The supported packages are DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, or BGA, etc.
● Highly scalable:
The customer can replace the module of the programmer as needed, and become a single-engineering or multi-programmed mass production programmer. The original ALL-11 series ADAPTER & CONVERTER can still be used on the ALL-100A so that your old assets can continue to create new value.
● Easy to operate:
The operation is user-friendly. After loading the program from the computer, the user only needs to select (Blank check, Program, Auto) and other functions on the main menu of the screen, and then press the YES key of the host or the screen on the screen. RUN” button to start programming
● Good stability:
This IC programmer uses HILO,s renowned ALL-11 technology and experience in the industry, and its security has optimised.
● First performance:
Each pin has a highly flexible drive line with low interference and fast programming speed, as well as overload protection and self-diagnostics to ensure excellent performance of the ALL-100AIC programmer.
● Free update of weekly support software:
Update your weekly support software via the Helo website to make your ALL-100A programmer meet the latest requirements.
● Global service network:
With customer service locations and distributors in 35 countries around the world, your problem can solve wherever you are.
● Suitable for engineering units and mass production units:
The newly designed ALL-100A programmer is excellent in structure, and it is ideal for use in a small number of engineering units or large-volume production units.
HILO ALL-100A Programmer Product Specifications
● Support devices:
Add: Add: NO.14-A30 14Floor,Overseas Decoration Building,NO.122 Zhen Hua Road,Futian District;Shenzhen