The support of the staff will be continuously updated in the future, supporting various brands and various devices to meet different customers
Production and maintenance needs.
The primary function of the FT200 series programmer is to MCU, MPU, DSP, FPGA, FLASH,
The memory of EEPROM and other chips can be erased, programmed, read, etc., with online and offline functions,
It can be applied to R & D online download, factory production burning, after-sales maintenance and repair, outdoor product upgrade,
Bulk burning by professional burning manufacturers. At the same time, it supports remote code download and limits the number of programming, which is very suitable
The integrated plan integrator issues product upgrade codes to customers.
Product Features 2.0 inch LCD true color display, showing menu, status, progress, project name, etc.
Large-capacity storage, support 500+ project storage at the same time, the programmer can switch arbitrarily
Devices supporting UART, CSI / SPI, SWD, PORT interface
The highest rate of UART interface can reach 4Mbps, and the highest rate of SPI interface can reach 12Mbps
Support online and offline mode, support designated area programming, online functions support functions such as verification and erasure
Support remote encrypted transmission, remote download project, support remote encrypted authorization
Support HEX, MOT, S19, BIN and other files, support multi-file loading, insert data at any address
Programming support 1.8V ~ 5V wide voltage output, hardware overcurrent detection, adapt to various voltage devices
The wide input voltage, support 9 ~ 18V DC input
The built-in data is encrypted by DES algorithm to prevent the programming code from being cracked by reverse engineering
The extended interface outputs programmer busy, success and failure status; the output can directly drive 5V relay
Support RS485 bus remote control, support multiple parallel control
The Chinese and English interface can be switched flexibly and can be used at home and abroad
Free drive for Windows system, plug, and play
24 hours first-line engineers answer questions online
1.3 Technical parameters
Power supply: DC9V – 18V (internal positive and negative)
Programming interface power output: voltage: 1.8V-5V (± 0.2V) drive current: less than 200ma
Extended interface 5V output: voltage: 5V (± 0.2V) drive current: less than 200ma
Extended interface 3.3V output: voltage: 3.3V (± 0.2V) drive current: less than 200ma
Extended interface status output pin high-level voltage: 5V (± 0.2V)
Extended interface status output pin high-level drive current: less than 100ma (can drive 5V relay)
Expansion interface 485 communication rate: 4800bps
Asynchronous programming maximum rate: 4Mbps (serial port, etc.)
The maximum speed of synchronous programming: 12Mbps (SPI, SWD, etc.)
long.