Welcome: Chip programmer

HOME / Applications / EMMC programmer

EMMC programmer

The EMMC programmer is a brand new version of the professional phone flashing and unlocking tool intended for a wide range of Samsung, Huawei, LG, Lenovo, Motorola,Oppo, Sony, Xiaomi, ZTE and other devices through USB, UFS and MMC interfaces. The main intended purpose of EMMC programmer is repairing dead boots of the devices (mobile phones, PDAs, modems, etc.) or these devices recovery, until they become fully operational.

Hardware

  • New ergonomic design
  • More powerful hardware base that can be easily enhanced
  • Faster interaction with PC (USB 3.0)
  • Wide range of voltage regulation
  • Introduced ISP method for UFS flash memory without desoldering
  • Identification of external expansion boards (UFS, eMMC sockets, PIN-CONNECTOR, etc.)
    • capable to work with other peripherals by means of PIN-CONNECTOR
  • Advanced multicolor indication of operation modes
emmc progammer

UFS

  • UFS operation modes: slow (PWM) and fast (HS)
  • Read Android build info
  • Main features:
    • Read
    • Write
    • Wipe Data
  • UFS Service Operations
    • Distribute UFS Storage
    • Configure UFS descriptors, attributes, flags
    • Save/Write Config descriptors
    • Save/Write attributes
    • Save Flags
    • Write OEM ID
    • Format UFS (all active LUN)
    • Read RPMB Counter
  • Factory Repair of UFS flash memory

MMC

  • Introduced ability to work with MMC by means of 8-bit bus
  • Increased MMC data transfer speed
  • Detection of eMMC socket connection
    • BGA153/169
    • BGA162/186
    • BGA 529
    • BGA 221
emmc progammer

Hardware Features:

  • Fast USB 3.0 high-speed mode (+USB 2.0 compatibility)
  • UFS data transfer speed 55 MB/s (writing) / 100 MB/s (reading) and more
    • depends on PWM/HS working mode and flash storage speed
  • 1-bit, 4-bit and 8-bit MMC buses supported (40 MB/s and more)
    • speed depends on bus width and flash storage speed
  • In System Programming (ISP) now possible for MMC and UFS flash memory types
    • without desoldering, if there is a technical capability to solder by means of PIN-CONNECTOR expansion board
  • All output voltages (VCC, VCCQ, VCCQ2) regulation within operation range 1.2…3.3V
emmc progammer

Software Features:

  • Full-featured professional software
    • Supports all operations (Read, Write and Edit) with any required memory partition via UFS, MMC, and USB interfaces.
  • Service operations with UFS memory
    • Divide flash memory into LUN units
    • Work with descriptors, attributes, flags
    • Write OEM ID
    • Erase memory on all active LUN
    • Read RPMB Counter
  • Service operation with MMC flash memory
    • Edit: geometry, partitions, CID, CSD and other data registers
    • Restore/Update flash memory firmware
    • Read/View Extended CSD registers
    • Format flash memory
  • Simple intuitive GUI interface suitable for both beginners and experts
  • Quick device restoration by means of SRF files
  • SRF files contain partition data as well as other useful information (help files and diagrams)
  • SRF data are compressed (to increase performance)
  • Built-in Partition Manager
    • Partition Manager allows you to edit the required partitions and save changes thus improving user experience. Plus, you will be able to open Full Flash binary files, edit the file content and save the edited file back on the device.
  • Simple operation for each partition separately (Read, Write, Erase, Edit) on the specific storage devices
  • Built-in Smart-Repair-File Constructor with Partition Manager for creating your own SRF files
    • SRF file can be taken from the device or read from Full Flash binary file. This functionality allows user (without developer’s assistance) add devices to the list of supported models, which are not officially supported yet. User can upload the custom SRF file into separate section of Support Zone and submit it for further analysis of the developers. If this custom SRF file is considered legitimate and correct, name (or nickname) of the author will be credited within the next update. Thus, user has the opportunity to participate in the development of Medusa PRO II and become known in certain circles.
  • Built-in Download Manager allows you to download files directly from the software
  • Devices with NAND, OneNAND and eMMC memory types are supported via USB interface
  • Devices with eMMC memory type are supported via MMC interface
  • Software is compatible with Windows 10
emmc progammer

CONTACT US

Contact: Bevan

Phone: 0086-13378667812

Whatsapp:0086-13378667812

Email: orod@chip-programmer.com

Add: Add: NO.14-A30 14Floor,Overseas Decoration Building,NO.122 Zhen Hua Road,Futian District;Shenzhen

Scan the qr codeClose
the qr code