SF600 SPI NOR Flash Programmer

The SF600 is a high speed “in System Programming” programmer to update the SPI Flash soldered on board (In-Circuit Programming) or in the socket adaptor (Offline programming). The programmer is easily controlled by the computer DediProg Software through the USB bus offering a friendly interface and powerful features to users. 

SF600 combines the advantages of SF100 with additional improvements: High-speed USB and higher SPI performances.

Highlights

  • USB High speed and high SPI performance, support up to 2Gb SPI Flash
  • In circuit Programming: Program on-board SPI Flash
  • Offline Programming: Program SPI Flash in the socket
  • ISP Port supports 2 CS pins to program two Serial Flash memories
  • Start button feature: Able to Batch in the USB mode
  • Signal conflict protections
  • Multi-Programmers Capability through USB
  • Support 1.8V low voltage IC
  • Support Windows 2003 and above
  • Support both 32 and 64 bit OS
sf600-1
sf600-1

HIGH PERFORMANCE (25MHZ, SINGLE IO)

*Please note the programming and verify time will depend on different IC type; please refer to the IC specification before programming.

Hardware

SF600 is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the SF600 2×10 header pin out. DediProg also provides the SF600 ISP Cable which is used to connect the SF600 programmer to the 2X6 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF600 ISP Cable 2×6 pin out.

The SF600 USB software tool chain offers high flexibility and fits the different and highest requirements:

 

sf600-2

Hardware Requirement for ISP

To have a clear understanding on the different ISP or backup boot methods and different reference schematics, please download our dedicated application notes: AN0103 and AN0106 

Standard Package 
  • SF600 Programmer x 1
  • USB Cable x 1
  • ISP Cable (ISP-600-CB1-G) x 1
  • SF100 2.54mm 2*4 ISP Cable (ISP1-CB) x 1
  • SF600 Universal Adaptor (ADP-SF600-TO-SF100) x 1

 

Optional Purchase
  • Backup Boot Flash Module-8N
  • Backup Boot Flash Module-8W 
  • Backup Boot Flash Module-D8W
  • Backup Boot Flash Module-DIP
  • Backup Boot Flash Module-16W
  • Backup Boot Flash Module QUAD-8W

Related products

This is the heading

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

sf600-1