The EP968Ti supports chips from leading world manufacturers:
–ST STMicroelectronics: STM32F0 STM32F1 STM32F2 STM32F4 STM32L STM8S STM8L
–MicroChip MSI: PIC12 PIC16 PIC18
–Atmel: ATmega ATtiny
–Freescale Freescale: HCS08 RS08
–Ti Texas Instruments: MSP430
–Silabs: C8051 Series
–NXP NXP: P89LPC9xx LPC2xxx LPC17xx LPC11xx LPC13xx
EP968 upgrade to OLED dual screen, the screen is more beautiful, and the display content is more;
Supports major manufacturers ISP online programming: PIC, AVR, STM32, HCS08/RS08, LPC2xxx, LPC9xx, STM8S, STM8L, C8051F… models are gradually increasing.
The national patent protection interface circuit dramatically reduces the chance of accidental damage to the programming machine or target chip. The interface can withstand 15V high voltage access without cost (the input state can face when not limited).
The data in the handheld uses CRC32 checksum, and data fingerprint technology (MD algorithm) enhances data protection.
The burning is stable and foolproof. You can also choose to verify multiple times.
Stable operation: Allows the target board to be shorted without damaging the programmer or damaging the target board.
The HEX and other code files of the handset can be encrypted. Encrypted data cannot read.
Internal RC oscillation, voltage reference calibration, and HEX file generation based on calibration results.
The number of programming limits can set.
EP968 does not connect to the server through the network, ensuring the security and confidentiality of the user code, and there is no risk of compromise.
A high ease of operation, natural for the operator to get started:
Advanced chip-aware technology that automatically burns without the need for a button.
There are screen and sound prompts for chip burning errors.
An operator can look after multiple handhelds to burn at the same time, which is more flexible and more intuitive than the traditional one-to-many burner configuration.
Supports imported code files in full format, supports BIN/HEX/S19/430txt/IAR simple code and more.
USB2.0 interface. Built-in 2 U disk, one for storing the handheld driver and software, one can be freely used by the user. No need to work for drivers and software.
The handheld can store up to 128 user program code files.
The handheld can store 64 firmware codes to support online download and programming of different series of MCU/ARM chips.
It can power by the built-in dry battery and supply to the outside. In addition to being used in the production workshop, it is also suitable for use outside the field.
The customer pays EP968 one-year free warranty (except for consumable parts and human-made faults), no return and replacement, warranty shipping in principle.
Add: Add: NO.14-A30 14Floor,Overseas Decoration Building,NO.122 Zhen Hua Road,Futian District;Shenzhen