A new generation of universal mass production programmer designed with a new concept, using a high-speed USB2.0 interface, the transmission speed can reach 480Mb/s. According to the mass production needs, the ALL-100 replacement programming module converted into the ALL-100/GANG mass production programmer. Up to 8 ALL-100/GANG can connect via a USB interface for synchronous or asynchronous programming, and up to 64 ICs can programm at the same time.
HILO ALL-100/GANG mass production programmer performance characteristics
A wide range of supported ICs:
The IC programmer is available in a variety of 8 to 300 pins, including EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/MCU, etc. Supported packages include DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, or BGA, etc.
● Highly scalable:
The customer can replace the IC programmer’s module as needed, and become a single-engineering or multi-programmed mass-programmer. The ALL-11 series of ADAPTER & CONVERTER can still be used on the ALL-100 so that your old assets can continue to create new value.
● Easy to operate:
With the Windows user interface, the operation is user-friendly. After loading the program from the computer, the user only needs to select (Blank check, Program, Auto) on the main menu of the screen, and then press the YES key of the host or the screen on the screen. RUN” button to start programming
● Good stability:
The use of HILO’s renowned ALL-11 programmer technology and experience in the industry has refined and the balance has optimised.
● First performance:
Each pin has a highly flexible driveline with low interference and fast programming, as well as overload protection and self-diagnostics to ensure the superior performance of the ALL-100 IC Programmer.
● Free update of weekly support software:
Free upgrades to the weekly support software through the Helo website to keep your ALL-100 programmer up to date.
● Global service network:
With customer service locations and distributors in 35 countries around the world, your problem can solve wherever you are.
● Suitable for engineering units and mass production units:
The newly designed ALL-100 programmer is excellent, and it is ideal for use in a small number of engineering units or large-volume production units.
HilLO ALL-100/GANG mass production programmer product specifications
-AC voltage: 100-240VAC.
HI-LO ALL-100/GANG mass production programmer related configuration
When using any GANG programming module or TSOP flash programming module, you must add the ALL-100-PIN CARD and place it in the slot on the right side of the ALL-100 mainframe numbered 4th.
Number of feet: from 8 pins to 300 pins
Device types: covering EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/MCU, etc.
Device connection method:
Basic: Most DIP packages can be used directly with the Textool.DIP48 connector.
Other: SOP, TSOP, PLCC, QFP, MLF, SDIP and other packages must select with matching adapter ADAPTER & CONVERTER conversion
The number of programming:
One: must cooperate with a single-seat dedicated programming module
Eight: must be equipped with eight specialised programming modules
Processor: Includes high-capacity FPGA & CPLD high-speed 16bits embedded processor
Interface: 1xUSB interface
Maximum number of connected units: Up to 8 ALL-100GANG can be connected
Data transfer rate: USB1.1 12Mb/S USB2.0 480Mb/S
Add: Add: NO.14-A30 14Floor,Overseas Decoration Building,NO.122 Zhen Hua Road,Futian District;Shenzhen