Support for programmable 16,817 chips (V2.37 2007/04/12) ■ Small, fast and powerful universal programmer ■Support for In-circuit programming (ISP) ■Connect PC-USB port ■ High-speed IEEE 1284 up to 1MB / sec transmission speed. ■Support window95/98/Me/NT/2000/XP ■ Download the free SW update from the Internet. ■ Provide power, including wires, software. ■ It has been certified by CE laboratory to comply with CE specifications.
ELNEC’s new USB-compatible universal programmer based on the Windows 95/98/ME/NT/2000/XP interface is the first member to meet the requirements of a fast-paced and universal programmer.
SmartProg2 is not only a programmer but also a TTL/COMS logic IC and memory. Also, it allows the user to use a range of test methods.
Provides very competitive pricing, reliable programming and superior hardware design, and is the best price/performance programmer in this regard. Because the high-speed FPGA hardware driver and the programmer’s internal timing program run, it has a breakneck programming speed. From this point of view, it is at least faster than competing products. For many chips, the writing speed is faster than that of competing products. Therefore, when you want to produce on the programming base, wait for the operation, unlike other complete services.
SmartProg2 can connect to IBM 486 or above PCs, portable, personal desktop computers via USB (2.0/1.1) port or any standard parallel (printer) port. The programmer also supports IEEE1284 (ECP/EPP) high-speed parallel port. Support for selected USB/LPT ports with SmartProg2 to any PC, from the nearest laptop to an older desktop without a USB port.
FPGA base on 48 powerful TTL pin drivers, providing High/Low/Pull up/Pulldown/read for each pin on the test bench. Advanced drive technology combined with high-speed and high-quality circuit reliability. Minimum support voltage As low as 1.8v, you can use it to program all the popular small voltage devices in the world today;
The programmer provides insertion and contact testing before programming and prevents chip damage caused by improper placement. These properties prevent chip damage due to misoperation by overcurrent protection and flow checking;
Embedded protection circuit can eliminate programmer damage or damage the programmer due to environmental or misoperation. All inputs of SmartProg2 programmer, including ZIF test socket, advanced drive technology connected to PC provide high speed and high-quality reliability The minimum support voltage is as low as 1.8v, so you can use it to program all the popular small voltage devices in the world today;
The programmer provides contact testing before programming and prevents chip damage caused by improper placement. These prevent over-damage and flow detection from damaging the chip due to mishandling;
Built-in protection circuit can eliminate the cost of the programmer or the damage of the programmer due to environmental or misoperation. All inputs of the SmartProg2 programmer, including the ZIF test socket, the connected PC, and the power supply, are protected against ECD rise. To 15KV.;
The SmartProg2 programmer performs edge-level voltage burn-in verification, which provides programming areas and maintains long data.
A variety of adapters support a variety of IC packages, such as PLCC, SOIC, PSOP, SSOP, SSOP, TQFP, QFN (MLF) SDIP, BGA, etc.
This programmer is easy to use and control, with drop-down menus, shortcuts and online help. Selecting the device can be done by selecting the classification, manufacturer, model, serial number and many other methods.
Related standard burn operation commands (read, blank check, program, verify, erase), as well as some test functions (insert test, flow detection), also include some additional features such as (autoincrement, product mode – add chip Start burning immediately.)
Supports all known data formats, automatically recognises and converts the appropriate file format when importing files.
Auto-increment programming can assign different serial numbers in each IC, or increment the serial number, or choose to read the serial number from the user’s file.
Programmer software provides detailed IC information including a variety of useful packages for drawing, descriptions of chip labels (prefix and suffix meaning).
Use BAT or DLL files through other application commands, the remote control allows PG4UW software flow control. Jam Player explains the Jam file in JESD-71 of JEDEC standard, and the Jam file generatby the design software provided by the manufacturer of the respective programmer. ZIF seat
A powerful multi-programming program can connect multiple SmartProg2 programmers on the same PC (via USB port), support many chips, as recommended by a single SmartProg2 programmer, and it will not significantly reduce the programming speed. As we all know, collaborative multi-programming – each programmer can work independently; each programmer can also program different chips.