VP998 car progarmmer

FEATURES:
Dimension:168*180*32mm,weight:450g.
Electrical spec. of the AC adapter: AC input 100V to 240V, 50/60Hz, DC output 9V/2.0A; power:18W
48 Pin ZIF socket with universal pin-drivers.
Interface with LAPTOP, PC or compatibles through USB port
Accepts standard file formats: JEDEC, INTEL (Extended) HEX, HOLTEK, EMC(.CDS), INTEL HEX16, Motorola S record
Manages 16 and 32-bit word split (Set Programming)
Features Test Vector capability and multiarray fuse map editor
Test TTL/CMOS logic ICs and Dynamic/Static Random Access Memory devices
Optimum programming for each individual device
Automaticly Identifies the manufacturer and type of E(E)PROMs, Auto identifies TTL/CMOS logic IC
Device insertion and poor-pin-contact check
Support 1.5v Low voltage devices
Not need exterior adapter for mostly devices.
Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters
Auto-run mode starts programming automatically upon detection of chip insertion
Supports WindowsXP/Vista/ Windows 7/8/10
Supports eight languages,such as Chinese(Simplified),Chinese(Traditional),English,Korean,Poland,Italian,Portuguese，Dutch, Turkish and Hungary.

The VP-998 is the latest top of the range Wellon Universal Programmer, with support for over 83,000 devices, including PIC microcontrollers, EEPROMs, dsPIC, AVR and other microcontrollers like AT89, plus PLDs and flash memory.
It also includes an ISP adapter (WL-ISP-U1) for programming devices in-circuit.

It is very fast because it has USB 2.0 interface for Hi-speed data transfer.

The full device support can be seen here, in new window.

Other Universal Programmers in the range also support Microchip devices or just memory.
See Wellon Programmer Range for an overview of all Wellon universal programmers.

ROM: N/CMOS E(E)PROM, SeriesE(E)PROM, and FLASH Memory
PLD: CPLD, EPLD, GAL,PEEL,PALCE and more
Microcontroller: Atmel, Intel, Microchip, Signetics, Zilog, etc.

IC TEST:
TTL (74 series), CMOS (40/45 series) Logic IC
SRAM (2114, 6116 …) memory device

DEVICE UPDATES:
WEILEI updates software and device algorithm regularly. You can get the latest software free of charge through internet

• USB 2.0 for much faster programming
• Dimension:160*180*32mm,weight:425g.
• 48 Pin ZIF socket with universal pin-drivers.
• USB Interface so programmer can be used with LAPTOPS, PC, PS/2 or compatibles
• Accepts most compiler outputs in JEDEC format including ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer and ISDATA
• Manages 16 and 32-bit word split (Set Programming)
• Features Test Vector capability and multiarray fuse map editor
• Test TTL/CMOS logic ICs and Dynamic/Static Random Access Memory devices
• Optimum programming for each individual device
• Auto identifies TTL/CMOS logic IC
• Automaticly identifies the manufacturer and type of E(E)PROMs
• Support 1.5v low voltage devices
• Device insertion and poor-pin-contact check
• Adapters are not needed for DIL devices
• Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters available
• Auto-run mode starts programming automatically on detection of chip insertion
• Super programming speed.
• Supports WindowsXP/2000/Vista/Windows 7/Windows 8 (32 and 64-bit)
• Support for manufacturers such as National, Philips, Signetics, Tesla, TI, Altera, Atmel, AMD-Vantis, Lattice, NS, Zilog, Microchip, Intel, Motorola, ST, Holtek, Samsung, Scenix, Fujitsu, Hitachi, NEC, Toshiba, Cypress