Welcome: Chip programmer

HOME / Chip programmer / xeltek programmer / SuperproSB03 programmer

SuperproSB03 programmer

  • Feature:SUPERPRO/SB03 is a cost-effective much fully automatic IC programming device designed for large-scale electronic product production
  • Price:It saves 10% to 15% more than amazon, ebay, aliexpress etc.
  • Shipping:Free shipping

SupperproSB03 IC programmer
Features: are as follows:

SUPERPRO/SB03 is a cost-effective much fully automatic IC programming device designed for large-scale electronic product production. The tool automatically completes the whole process of chip grabbing, placing, programming, chip taking and packaging, replacing the traditional manual work, which not only dramatically improves the production efficiency, but also eliminates possible human errors in IC programming process. Compared with the first generation product SUPERPRO/SB01, the production efficiency increase by 2-8 times.

spsb03 IC programmer


1) Thanks to the new generation of high-speed IC programmer core, X4 socket module  X4 suction nozzle structure, the production efficiency can be increased by more than ten times, especially for large-capacity chips such as NAND/NOR FLASH, EEPROM etc.
2) The programmer system adopts 8 latest extreme speed, intelligent programmers, SUPERPRO/7500. The burning speed is up to 8 times faster than SUPERPRO/5000. Each programmer can burn up to 4 chips at the same time (not all chips), and the whole machine can burn up to 32 chips at the same time.
3) Four suction nozzles + independent block actuator + brand industrial computer and top industrial motion control card and servo system + professional control algorithm + high-speed visual positioning system constitute a high-speed, high-precision, high-stability motion take-and-place system. The highest efficiency is 2400 UPH.
4) Supporting more than 80,000 devices from more than 300 IC manufacturers. It is a truly universal fully automatic programmer.
5) Support customization or integration of third-party semiconductor testers into fully automated semiconductor testers.
6) IC packaging supports standard tray (TRAY), tape (TAPE) and tubing (Tube).
7) The marking system: marker and marker.
8) Powerful software functions designed for mass production. Engineering document barcode management, remote management, dynamic burning files, detailed log files, etc.
9) Compact design, covering an area of only 1280 mm *840 mm. Old office buildings and manned elevators will not become barriers to use.
10) The performance-price ratio is very high. The company is one of the few companies in the world that have the ability to develop both programmers and manipulators. Therefore, it can achieve the best integration of programmers, and ensure low cost. At the same time, it can quickly respond to the user’s software function customization requirements.

Automatic chip programmer


Motion system

Composition: Korean high-performance motion control board card + Panasonic servo system + THK screw and guide rail.
Accuracy: X axis: +0.02mm; Y axis: +0.02mm; Z axis: +0.02mm.
Effective stroke: X axis: 1000mm; Y axis: 500mm; Z axis: 40mm.
The accuracy of the suction nozzle is (+0.07 mm).
vision system
Industrial digital camera. 512 x 512 pixels.
Visual range: 30mm X30mm
Adjustment accuracy of visual system: x=y=0.07 mm, theta=0.1 degree
Programmer System
Programmer: Equipped with eight programmers SUPERPRO/7500.
1) Supporting more than 80,000 programmable devices from more than 300 IC manufacturers, including EPROM, Paged EPROM, parallel and serial EEPROM, some PROM with FPGA configuration, FLASH memory (NOR, NAND ), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, MCU, etc.
Packaging support: PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, MUBGA, CSP, SCSP, QFN, SOT, etc.
2) speed of reading and writing
3) 144-foot universal drive circuit. Within 144 feet, only one adapter is needed to encapsulate different types of chips. Universal adapters ensure fast new device support.
4) Direct support for 1.2V to 5V voltage devices.
5) More advanced waveform driving circuit provides a very high success rate of writing, and the programming results can be checked by the high and low voltage to ensure that the results are durable and stable.
6) The automatic detection chip is the pin contacts badly to avoid damaging the device.
7) Perfect over-current protection function to prevent damage to the programmer.
Control system
Operating system: Windows XP. Display: 17 inch LCD. Data input device: keyboard + mouse.
Communication interface: USB and LAN
Peripheral Equipment-Tape-out
The program chips repackage into TAPE. Choose accessories.
Peripheral Equipment – Peripheral Equipment – Tape-In
Tear Tape apart and suck it in the supply suction nozzle. Chip quasi-YAMAHA starts feeder. According to the chip width, the specifications are 8-32 mm. Choose accessories.
Peripheral Equipment – Fixed Tray Rack
Full of chips to program and disks to write successfully. Host matching.
Peripheral Equipment – Automatic Tray Feeder and Output Machine (Tray-In/Out)
Place 20 TRAY discs at a time, and automatically transfer one drive to the inside of the machine for writing. After that, automatically return, (mark), return, and automatically replace one disc until the end of all 20 drives. Choose accessories.
Peripheral Equipment-Tube Feeder (Tube-In)
Tape Ink-Marker is an additional system on Tape-out. It is used to mark a dot with ink on a chip that has been burned and written. Choose accessories.
Peripheral Equipment – Automatic Tray Ink Marker
For an additional system on Tray-In/Out. It is used to mark a dot with ink on a chip that has been burned and written. Choose accessories.
Peripheral Equipment Tape Laser-Marker
It is an additional system on Tape-out. Laser marking up to four characters on a burnt-out chip. Choose accessories.
Peripheral Equipment-Automatic Tray Feeder and Outlet Laser Marking System (TRAY Ink-Marker)
For an additional system on Tray-In/Out. Laser marking up to four characters on a burnt-out chip. Choose accessories.
Electrical and mechanical specifications
Working voltage: 200-245V/50-60Hz. Power: 2KW.
External air source: clean air, air pressure: 0.6 MPa.
Mechanical dimensions:
Host: 1280(L)840(W)1500(H)(mm)
Automatic Tray: 1100(L)380(W)1300(H)
Feeding and discharging machine: 1100(L)380(W)1300(H)

Scan the qr codeClose
the qr code